VELA Motorbike Battery, Vehicle Battery & Industrial Battery 

ShIP to

Learn to Change a Car Battery

by:VELA     2020-04-04
Car batteries are vital for your vehicle as it's used to provide power throughout the car. Since they are also used for quite a long time, you must expect the need to change the car battery in your vehicle for it to continue to run. If you need to change your car battery, you must know the procedures on how to change it. The good news is there are only several procedures you need to know like removing its cables and clamps, cleaning the battery and placing the new battery back. Therefore, it can be simple to change a car battery so you'll not be intimidated with it. Apart from just knowing the procedures, it's also vital for you to know other procedures that will help you in changing your car batteries. These are factors that you need to consider to make sure you'll change them without any issues in terms of safety or damages. Locating the battery Typically, you'll know that it is the battery when you see its black and red terminals. These are useful since you need to note that terminal ports also play an important role in removing the cables. Basically, removing and re-attaching their cables will depend on these ports. When removing, you must detach the cables connected to the negative terminal first and then remove the positive one. When re-attaching the cables, connect the positive first followed by the negative ones. You must also be ready to recognize that some cars have battery covers, so these ports may not be visible. If you check your vehicle and these ports are not visible, chances are they're hidden under a battery cover. Safety Safety is very important when you change car battery. This is vital since accidents may occur if you're not careful in changing the battery. One of the important things to remember is to not change the battery when the engine is still running. Turn it off first before doing anything under the hood. In relation to cables, it's been said earlier to remove the port cables in order. Remove the negative cable first and then the positive while doing the reverse procedure when attaching the cable back. Not following this accordingly can result in a short-circuit, damages and even electrical shocks. Tools to use There are several tools you need to use when you are going to change car battery. First of all, you will need a wrench to loosen the nuts or bolts that connect the cable. This will allow you to remove the cable after being unlocked from the port. In addition, you also need to have wire brushes and baking soda solution to remove any corroded areas. Remember that corrosion will continue to occur when not removed so you better clean it before installing the replacement battery. In a nutshell, these important details are things you must learn when you change a car battery. This will keep you safe as you do the procedure while helping you execute them in an easier way.
Building a brand as VELA from the very start is simple so long as you keep 'the three C's' in mind: clarity, consistency and constancy.
VELA Power Technology Co., Ltd. endeavors to be valued as an industry leader in client satisfaction, sales growth, product performance, financial strength and profitability.
In various different types of car battery, car battery 3 is one of the most commonly used.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...