The main frame of VELA dry cell battery
has been tested over and over again in terms of dimensions, lengths, and heights as well as angles, type, number and span of frames. It can be installed in any direction or position2.
The product can be worn for a long period and it's not likely to be torn apart because it has enough strong seams. With high start-up performance, it enables the engine to start even in extreme weather conditions3.
The quality of this product is well controlled by implementing strict testing process. It can withstand extreme ranges in temperature4.
Our experienced quality inspectors have carefully tested the product in all respects, such as its performance, durability, and so on, in accordance with the international standards. The product can withstand the corrosion of acid5.
Our strict quality management system greatly ensures the quality of this product. Its maintenance-free structure provides easy vent plug access
Carton & Pallet
Place of order:
Seal Maintenance Free
Lead acid & PP
About 30 days
• High cranking performance (CCA – Cold Cranking Amps) to suit modern engine starting needs
• Latest lead acid technology to meet the demands of modern market conditions
• Designed and constructed to achieve Heavy Duty outputs in testing market environments
• Maintenance free construction with easy vent plug access for checking electrolyte levels – ensures maximum battery performance and life
• Carry handles to allow for ease of transport
• Can be used for cranking, igniting and lighting
• Low self discharge rate
• Longer life
• Environmentally friendly
The indicator on cell cover can display the battery’s state of charge. When it displays “Green”, the battery can work normally. When it displays “White”, the battery should charge in time. When it displays “Red”, the battery should be replaced at once.
Indicator Display battery's state of charge
After long periods of storage (6 months or more) the battery will need to be recharged when the terminal voltage falls below 12.5 V. When recharging, please keep yourself and your colleagues safe by following all the relevant safety recommendations (such as wearing protective glasses).
Checking the terminal voltage
The terminal voltage should be checked six months after the date of manufacture. And if the voltage has dropped below 12.5 V, the battery needs to be recharged to between 12.7 and 12.8 V before being stored further.
If the terminal voltage drops below 12.5 V, the battery must be recharged. The recommended charge current equates to one tenth of the battery’s nominal capacity (e.g. 8 A for a battery with a nominal capacity of 80 Ah). How long the battery needs to be recharged obviously depends on how it’s going to be used afterwards.
1.This type of battery is a liquid lead-acid battery and should be stored in a dry, clean, well-ventilated place at a temperature of 5-25°C. Avoid direct sunlight and at least 2 meters from the heat source.
2.The battery must not be placed upside down or tipped over. And must avoid any mechanical impact and heavy pressure.
VELA Power Technology Co., Ltd. holds a safe lead in the market mainly based on the competence and ability in developing and manufacturing dry cell battery . We have a highly efficient factory. State-of-the-art machines and robust production processes assure the seamless delivery of finished products that our customers can confidently launch.2.
Our manufacturing center is strategically located close to the airport and the harbor. These advantageous traffic conditions make sure our smooth supply of raw materials and quick delivery of our finished products.3.
Our products are highly recommended by customers and extensively exported to Europe, America, Australia and other continents of the world. Standing on the innovative foot, we always assist customers to design and develop their products. VELA Power Technology Co., Ltd. wishes to be one of the most professional and competent heavy duty battery supplier. Inquiry!